The right part, at the right price, in the right lead time. We supply industrial equipment, spare parts and consumables to operators who lose money by the hour when a unit is down.
What a missing part actually costs
A refinery train, a compressor, a loading arm: when one of them stops, the loss is counted in hours, not in the price of the part. Yet most of the delay rarely comes from the factory. It comes from an enquiry that was never properly qualified, a specification read too quickly, or a supplier who stopped answering once the order was placed.
We buy for people who are held accountable for a start-up date. That changes the method: every enquiry is checked against the specification before it is quoted, and every order is followed inside the factory until the goods are on the truck.
What we supply
Gaskets
Official representative of a world leader in sealing and gaskets. Spiral wound, Kammprofile, ring joint, expansion joints, flange insulation kits.
Bolting
Hexagon bolts, studs, eye bolts, threaded rods and washers, in the grades your specification calls for.
Control valves
Control valves from a world leader in flow control. Supply plus maintenance, inspection and calibration. Ball, butterfly, motorised and pneumatic.
Pumps
Official distributor for a world leader in pumps. Centrifugal, multistage, submersible, dosing, magnetic drive, hermetically sealed and vacuum.
Hoses & fittings
All fluids, all pressures, crimped in our own workshop. Including floating hoses for offshore discharge.
Conveying
Steel cord and textile conveyor belts, repair material, V-belts, synchronous belts and pulleys.
Bolting and gaskets across North Africa
Exclusive distribution
Our exclusivity on bolting and gaskets across the whole North African region is why plants call us first when a shutdown date is fixed and the warehouse is short.
Competitive pricing, fast delivery, and the certificates that let your inspector accept the material on arrival.
Sourcing is only half the job
We consolidate, document and ship so the part reaches the right site, cleared and on time, whether it is a single gasket or a full shutdown package.
Loading and transfer equipment, logistics equipment, chemicals and raw materials come on the same scope.
Instrumentation, sealing and packages
Instrumentation
Pressure, temperature, level and flow transmitters from a world leader in instrumentation, with maintenance, inspection, calibration and audit on the same scope.
Sealing
Mechanical seals, thermal insulation textiles rated 550 to 1200 degrees C, fibre and graphite sheets, PTFE and expansion joints.
Packages & spares
Skids, static and rotating equipment, instrumentation and electrical spare parts, machines and software.
The specifications we buy to
Send us a tag number, a data sheet, a drawing or a photo. Before quoting we identify the applicable specification, because a part that is dimensionally right and metallurgically wrong is still a shutdown.
| Product family | Specifications commonly applicable | What has to be confirmed before ordering |
|---|---|---|
| Gaskets | ASME B16.20, ASME B16.5 and B16.47 flange ratings | Winding and filler combination, flange class, facing, service temperature |
| Bolting | ASTM A193 / A194, ASTM A320 for low temperature | Grade, heat number, coating, hardness where sour service applies |
| Sour service | NACE MR0175 / ISO 15156 | Hardness limits, material restrictions, certification heat by heat |
| Valves | ASME B16.34, API 6D, API 598 testing, ISO 15848 for emissions | Body and trim material, pressure class, test and emission certificates |
| Pumps | API 610, API 682 for mechanical seals | Duty point, NPSH available, seal plan, material class |
| Instrumentation | ATEX / IECEx for classified areas, IEC 61508 for safety loops | Zone and gas group, ingress protection, SIL level, calibration certificate |
| Hoses | EN 1765 / EN 13765, OCIMF GMPHOM for offshore floating hoses | Fluid, working and test pressure, end fittings, traceability of the crimp |
| Traceability | EN 10204 type 3.1 certificates | Mill certificate matching the heat actually delivered |
From enquiry to delivered goods
Qualify
We read the specification, not just the reference. Anything missing is raised the same day, with a proposed equivalent when the original is obsolete or discontinued.
Source
The enquiry goes out to the manufacturers we represent and to the qualified suppliers we work with, with the technical requirement attached in full, not summarised.
Quote
A written offer stating price, firm lead time and applicable certification. Where a lead time carries a risk, it is written in the offer, not discovered after the order.
Expedite
Once the order is placed we follow it inside the factory: production slot, inspection points, packing. You get the status without having to chase it.
Consolidate and ship
Goods grouped, documented and dispatched, from a single gasket to a full shutdown package, with the customs documentation prepared for the destination.
Close out
Delivery checked against the packing list, certificates handed over, and the file kept so the same reference can be reordered with one email.
What comes with the goods
Documentation is part of the supply, not an afterthought. An operator has to be able to defend the part in an audit.
- A written offer stating price, lead time and the applicable specification
- EN 10204 type 3.1 material certificates where the specification calls for them
- Certificates of conformity and, for valves, pressure test reports
- Calibration certificates for instrumentation
- ATEX / IECEx documentation for equipment in classified areas
- Packing list, marking and preservation suited to the destination
- Customs documentation prepared for the country of delivery
- A traceable file, so that a repeat order takes one email
When the manufacturer stops answering
We are the appointed representative of several manufacturers, and we take on the enquiries other buyers have already given up on.
Appointed representative
On the lines we represent you deal with us directly instead of a generic mailbox: factory pricing, confirmed lead times and warranty handled by people you can actually call.
Dead-end enquiries
Quotations that never come back, obsolete or discontinued references, technical questions left unanswered for weeks. Hand us the file: we requalify the requirement, find the right person inside the factory and escalate until you have a written answer.
We travel to the plant
When email and phone stop working, our team goes to the manufacturer’s premises. Face to face, a blocked file is settled in a day: production status, inspection, packing and shipping date confirmed on the spot.
Frequently asked
Can you quote without a data sheet?
A photo of the nameplate, a tag number, a hand sketch with two dimensions or the old part itself is usually enough to identify the item and come back with an equivalent. Where the identification is not certain, we say so rather than quote something that will not fit.
What lead times should I expect?
It depends entirely on the item: stocked consumables ship in days, a manufactured valve or pump can run to several months. The lead time is stated in the offer and confirmed in writing, and if it slips at the factory you hear it from us before it becomes your problem.
Do you supply for sour service?
Yes. Sour service items are ordered against NACE MR0175 / ISO 15156, with hardness limits and material restrictions checked heat by heat, and the certificates supplied with the goods.
Can you take over an order another supplier has failed to deliver?
That is a large part of what we do. Send us the original purchase order and the correspondence: we requalify the requirement, go back to the manufacturer and, where it is the only way to unblock the file, travel to the plant.
Do you deliver to site, or only to the port?
To site. We consolidate, document and ship, and we prepare the customs documentation for the destination country.
Do you supply single items, or only packages?
Both. A single gasket for a leaking flange and a full shutdown package are handled by the same team, with the same documentation.
Send us your enquiry
Data sheet, drawing, tag number, or simply a photo of the part. Send what you have and we come back with a quotation.